Allied Appliance is a Wholesale Distributor Offering the Lowest Prices on Top Brands. Give Us a Call at 1-800-991-8480 or Request a Quote Today!
General Electric Transition Kits Allow You to Replace Any Existing VTAC
With GE Transition kits you can replace most VTAC brands. Allied Appliance also carries VTACs from Islandaire, Friedrich, Amana and First Co. Request a Quote to learn more.
FREE SHIPPING ON 8+ GE UNITS! Direct from Manufacturer Only
GE Vertical Zoneline Terminal Air Conditioners
A Vertical Terminal Air Conditioners (VTAC) provide a home-like appearance to your room, quieter operation and a wall thermostat that helps guests feel right at home. Rather than a traditional PTAC or TTW a/c unit, VTACs do not need to be mounted under or near a window. It is still a through-the-wall, packaged terminal unit, but instead of being 42″ wide and installed in under the window in the middle of the room, it has a vertical configuration and is installed in a closet-like corner enclosure. Curtains can hang all the way to floor and it makes more room design options available.
They are designed as an alternative to large, expensive central systems with none of the location restrictions of a traditional window unit. Because the unit is ducted, it can serve a single room or multiple rooms – thus giving you the cost benefit of package terminal units with the aesthetics, quieter operation and flexibility of a central system.
You can find these units in hotels, extended stays, assisted living facilities and multi-family/apartment communities.
GE Vertical Zoneline V10 Electic Heat with Corrosion Protection
MODELS
FEATURES
- Insta-Platform™ – One-piece design fully integrates with the wall plenum and aligns for a tight seal. Eliminates need for a customized platform construction on site
- Lowest global warming refrigerant in its class (R454b)
- Self-Contained Drainage System – Easy installation and simple chassis removal while leaving plumbing completely intact
- Fast-Connect Plumbing – Thoughtful design enables platform build and rough plumbing completed in only minutes
- Quick-Install Plenum – Plenum is easily installed from the interior of building, without the need for exterior building access* (*caulking required)
- Self-aligning, lock in place system – Perfect fit and mistake proof when the chassis is placed on the platform
- Onboard Diagnostics – Electronic controls give clear and fast diagnostics data and fault codes, for quick and easy notifications
- Anti-Corrosion Design – Exclusive rust-proof basepan and bulkhead provide another level of corrosion protection
- Ultra-Quiet – Delivers quiet cooling power with a smooth sound for a good night’s sleep
- On-board WIFI SmartHQ™ management capable – An optional WiFi module gives property managers the ability to oversee units, increasing productivity and enhancing guests’ experience
- Two way communicating thermostat capable
ACCESSORIES REQUIRED FOR INSTALLATION
Accessories required for installation:
Drain Platform (RAVDPLAT)
Plenum or Transition Plenum
Exterior Grille
Return Air Grille/ Access Panel
Remote Thermostat
Power Connection Kit
MANUALS / DOWNLOADS
GE Vertical Zoneline V11 Variable Speed with Perfect Control
Variable Speed Heat Pump
Range of 5,200 – 16,200 BTUs
Install accessories additional
MODELS
FEATURES
- Inverter Driven, Variable Speed Compressor (5,200 – 16,200 BTU)
- Perfect Control Technology
- Ultra-quiet twin rotor compressor
- Lowest global warming refrigerant in its class (R454b)
- Ultra-Low Heat Pump Operation (Down to Oº F)
- Streamlined Installation with Insta-Platform™ (sold separately)
- Self-Contained Drainage
- Quick Install Plenum (sold separately)
- Onboard Diagnostics
- Rustproof Bulkhead and Base Pan
- On-board WIFI SmartHQ™ management ready
- Dehumidification sentinel
- Dual EEV refrigerant control
- Two way communicating thermostat capable
- Works with Y1/Y2 staged low voltage control thermostats
SPECS & DETAILS
Nominal Cool Capacity: 12,000 BTU
Cooling Capacity Range @95F: 5,200 -16,200 BTU
EER2: 12.0
SEER2: 16.5
Nominal Heating Capacity: 10,900 BTU
Heat Pump Capacity Range @47F: 4,500 – 13,000 BTU
COP2@47F: 3.5
HSPF2: 7.1
ACCESSORIES REQUIRED FOR INSTALLATION
Accessories required for new installations (if not existing):
Plenum (telescoping) RAVWPT9 or RAVWPT15
Architectural Louver RAVAL3
Access Panel with Return Air Grille (optional) RAVRG4*
Return Air Grille (optional) RAVRG2*
Drain Platform RAVDPLAT
Power Cord – varies by voltage and amperage
MANUALS / DOWNLOADS
GE Vertical Zoneline V12 Variable Speed Makeup Air
V12 Makeup Air with Makeup Air, Perfect Control and Variable Speed (5,200 – 16,200 BTU range)
Install accessories additional
MODELS
FEATURES
- Inverter Driven, Variable Speed Compressor (5,200 – 16,200 BTU)
- Adjustable Speed Make Up Air
- Perfect Control Technology
- Ultra-quiet twin rotor compressor
- Lowest global warming refrigerant in its class (R454b)
- Ultra-Low Heat Pump Operation (Down to Oº F)
- Streamlined Installation with Insta-Platform™ (sold separately)
- Self-Contained Drainage
- Quick Install Plenum (sold separately)
- Onboard Diagnostics
- Rustproof Bulkhead and Base Pan
- On-board WIFI SmartHQ™ management ready
- Dehumidification sentinel
- Dual EEV refrigerant control
- Two way communicating thermostat capable
- Works with Y1/Y2 staged low voltage control thermostats
SPECS & DETAILS
Nominal Cool Capacity: 12,000 BTU
Cooling Capacity Range @95F: 5,200 -16,200 BTU
EER2: 12.0
SEER2: 16.5
Nominal Heating Capacity: 10,900 BTU
Heat Pump Capacity Range @47F: 4,500 – 13,000 BTU
COP2@47F: 3.5
HSPF2: 7.1
Makeup Air CFM Range: 30 – 70 (no filter), 25 – 70 (with MERV13 Filter Kit)
ACCESSORIES REQUIRED FOR INSTALLATION
Accessories required for new installations (if not existing):
Plenum (telescoping) RAVWPT15B
Architectural Louver RAVAL4
Access Panel with Return Air Grille (optional) RAVRG4
Return Air Grille (optional) RAVRG2
Drain Platform RAVDPLAT
MUA Filter (optional) RAA13V
Power Connection Kit – varies by voltage and amperage
MANUALS / DOWNLOADS
GE Transition Kits for VTACs
VTAC Transition Plenum for AZ75/85 to AZ95
Model #: RAVTRANS2
Fully Integrated Solution for most Islandaire VTAC plenums
Works with GE AZ7585 to AZ95 models
Transitions from existing AZ75/AZ85 plenum to AZ95 unit
VTAC Transition Plenum for AZ90/91 to AZ95, 8" or More Plenum Depth
Model #: RAVTRANS3
Fully Integrated Solution for most Friedrich and Amana VTAC plenums
Works with AZ90/91 to AZ95 models
Transitions from existing RAVWPT8 wall plenum used with AZ90/AZ91 series
VTAC Transition Plenum for AZ90/91 to AZ95, 8" or More Plenum Depth
Model #: RAVTRANS4
Fully Integrated Solution for most Friedrich and Amana VTAC plenums
Works with AZ90/91 to AZ95 models
Transitions from existing RAVWPT14 wall plenum used with AZ90/AZ91 series
VTAC Transition Plenum for V10, V11 & V12 Series
Model #: RAVTRANS1CO
Fully Integrated Solution for most First Co. and Amana VTAC plenums
Works with V10, V11 and V12 models
Includes all necessary hardware except RAVDPLAT to be ordered separately
Drain plumbing included
Make up Air Ready with optional Make up Air Port for V12 models
Heavy duty galvanized steel powder coated construction and UL listed
Designed to work with 1st Company and Amana plenums that are 21 ⅜” W x 43 ¾” H x 5″ to 20″ deep
Wall Thermostats for VTACs
Model #: RAK149F2
Wall Thermostat – Non-Programmable
- 24V AC digital remote wall thermostat
- Works with a single-stage cooling and single-stage or 2-stage heating systems
- Requires 7-wire hookup
Model #: RAK160W2
Wireless Thermostat
- Wireless Thermostat with wired power option
- Plug and Play with all AZ45/65/95 and AJE/AJH models
- 2 Fan speeds
Model #: RAK149P2
Wall Thermostat – Programmable
- 24V AC digital remote wall thermostat
- Programmable for 7-day or 5+2 day programs
- Works with a single-stage cooling and single-stage or 2-stage heating systems
Model #: RAK180W1
Energy Management Occupancy Sensing Wireless Thermostat
- Intelligent occupancy analysis Using a built-in occupancy sensor, differentiates between incidental and guest occupancy to completely eliminate unnecessary energy use
- Can be installed to be powered wired or wirelessly (via batteries)
- Make up air control with occupancy
- Night occupancy mode Disables energy management while guests sleep
- Precise temperature control
- Integrated wireless networking
- Easy to use interface
- Large LCD screen with automatic backlight
- Easy plug and play installation via quick connector
LIMITED ONE-YEAR WARRANTY: 1-year parts and labor warranty.
LIMITED FIVE-YEAR WARRANTY: 2 – 5 year warranty on the entire sealed refrigerating system. 2 – 5 year limited warranty on any certain parts* should they fail due to a defect in materials or workmanship. Full Warranty
What Type of Air Conditioner Do You Need?
Packaged Terminal Air Conditioner (PTAC) units are ductless, self-contained heating and cooling units that are mounted through a wall. These commercial-grade air conditioners are found in hotels and motels, multi-family communities and senior or assisted living facilities. In these locations, quiet and comfortable rooms are key to guest satisfaction and the PTAC’s customizable settings and easy operation can meet even the pickiest guests’ climate control demands.
The majority of PTACs come in the same standard size – 42″ wide, 16″ high, and 13 3/4″ deep – which will fit into most wall sleeves and grilles (which are required for installation). There are two types of PTACs: heat/cool resistance heat and reverse cycle heat pumps. Resistance heat PTACs generate heat by passing electricity through wires that directly heat up (similar to how a toaster works). Heat pumps typically consume less energy operate by removing heat from the outside air—even when the outside temperature is below freezing – and releasing the heat indoors.
Through-the-Wall (TTW) air conditioners will quickly cool rooms and other spaces using outdoor air to create airflow while still being environmentally friendly. Unlike window units, which sit on a sill, wall-mounted air conditioners are installed right into an exterior wall, using a wall sleeve for support. This leaves you with more window space and an unobstructed view. While installation on this kind of unit is more permanent, TTW air conditioners are much more secure and don’t allow for the kind of air seepage you typically get with window units. They can also be installed higher up or lower down on the wall to fit into your room or suite, depending on space.
TTWs come in electric heat/cool and cool only models. If you plan on using the unit year-round, consider a model with both cooling and heating abilities. These commercial-grade air conditioners are found in hotels and motels, multi-family communities and senior or assisted living facilities.
A Vertical Terminal Air Conditioners (VTAC) provide a home-like appearance to your room, quieter operation and a wall thermostat that helps guests feel right at home. Rather than a traditional PTAC or TTW a/c unit, VTACs do not need to be mounted under or near a window. It is still a through-the-wall, packaged terminal unit, but instead of being 42″ wide and installed in under the window in the middle of the room, it has a vertical configuration and is installed in a closet-like corner enclosure. Curtains can hang all the way to floor and it makes more room design options available.
They are designed as an alternative to large, expensive central systems with none of the location restrictions of a traditional window unit. Because the unit is ducted, it can serve a single room or multiple rooms – thus giving you the cost benefit of package terminal units with the aesthetics, quieter operation and flexibility of a central system.
You can find these units in hotels, extended stays, assisted living facilities and multi-family/apartment communities.
Mini-splits are ductless heating and cooling systems that allow you to control the temperature in specific areas or rooms. They’re known for being both flexible and highly efficient, and their ability to target specific zones is what makes them unique.
Mini-split systems employ two main components:
- An outdoor compressor/condenser
- An indoor air-handling unit(s) (evaporator)
They are easy to install, usually requiring only a three-inch hole through a wall for the conduit; which houses the power and communication cables, copper tubing, and a condensation drain line, linking the outdoor and indoor units.
Window air conditioners are the simplest type of a/c unit that are installed or mounted in an open window and plug into an electrical outlet. Because of it’s simple installation it cane be moved from window to window as needed and a large house or building may have several such units, allowing each room to be cooled separately.
The interior air is cooled as a fan blows it over the evaporator. On the exterior the heat drawn from the interior is dissipated into the environment as a second fan blows outside air over the condenser.
Get a Quote
Need Assistance? Have a Question? Don’t Know Where to Start?
An Allied Sales Representative is ready to help. Fill out your information to be contacted by our team or call 1-800-991-8480.
GE Warranty
LIMITED ONE-YEAR WARRANTY: For the period of one year from the date of original purchase, GE Appliances will replace any part of the air conditioner which fails due to a defect in materials or workmanship. During this limited one-year warranty, GE Appliances will provide, free of charge, all labor and related service costs to replace the defective part.
LIMITED FIVE-YEAR WARRANTY: For the period of five years from the date of original purchase, GE Appliances will replace Sealed Refrigerating System, if any part of the sealed refrigerating system (the compressor, condenser, evaporator and all connecting tubing) should fail due to a defect in materials or workmanship. During this limited five-year warranty, GE Appliances will provide, free of charge, all labor and related service costs to replace the defective part.
*LIMITED SECOND THROUGH FIFTH YEAR WARRANTY (Vertical Zoneline Only): For the period of the second through fifth year from the date of the original purchase, GE Appliances will replace Fan Motors, Switches, Heater, Heater Protectors, Compressor Overload, Solenoids, Circuit Boards, Auxiliary Controls, Thermistors, Frost Controls, ICR Pump, Capacitors, Varistors and Indoor Blower Bearing, if any of these parts should fail due to a defect in materials or workmanship. During this additional four-year limited warranty, you will be responsible for any labor and related service costs.